Header

Header
1983 Porsche 911 SC Targa

Monday, July 30, 2012

Patching the Gas Tank Opening

When I removed the gas tank from the car several months back, I discovered that the gas tank was used as part of the trunk enclosure, and a big hole would have to be sealed.


I cut a panel out of 18 gauge (1 mm) steel. The back of the panel had to be shaped with some persuasion from a hammer. The panel was then welded into place. I used a bright light from underneath to check for any pinhole openings.

Some primer and paint finishes the job. The underside is finished in primer and a high-build undercoat spray. This is the first sheet metal work I’ve ever done, and I’m glad it will not be very visible once the batteries are mounted in this space.

No comments:

Post a Comment